FAQs

Our frequently asked questions have been designed to assist your daily queries.

When you first receive your alarm, it is recommended you place the base alarm unit in a central place within the home (e.g. living room).

You will need to ensure the battery is in the box for the alarm to work and then plug the equipment into the wall.

You will hear an automated voice confirm the alarm is ready after a few minutes.

It is recommended you test the equipment using the red button on the box and also with any peripheral devices included in your package.

Following your successful test, you can be satisfied that we will be there when you next need us!

Your alarm will come with a mobile network sim inside which will mean it does not need to be connected to a landline telephone or broadband to work (as long as there is strong mobile signal). This ensures your alarm will be futureproof and will not require replacement following the analogue to digital switchover.

Careline Support LTD have an average answer time of 4.5 seconds (June 2023). In line with the TSA standards, we will answer over 99% of calls within 180 seconds
and 97.5% in 60 seconds.

When an alarm is activated, it will automatically call through to an experienced call handler who will arrange appropriate support for you. If the alarm is activated by mistake, it is important you respond to the Operator and confirm that is is an accident, we will then assume this as your monthly test call. If you do not respond, your contacts or the emergency services may be called.

Our Operators are not able to initiate a call through your alarm device. Your alarm can only be activated if you press the pendant or base alarm unit. If one of our Operators wanted to follow up with you relating to a previous call, they will call you via the telephone number provided to us on your customer information form.

In short- yes! When you choose to get your personal alarm, we will ask you to provide us with information relating to relevant medical information and history. We have various ways of increasing the volume of your unit, including the use of external speakers. If you are deaf, we have additional ways to assist you, please ensure you notify us upon sign up. Ultimately, whether you can hear us or not, we will always get you help arranged.

The pendant range outside of your property will depend on the size of your property and the location of your main alarm unit. We would always recommend on receipt of your alarm to test it in multiple locations to understand the parameters between the wearable alarm device and the main unit base.

When your pendant alarm battery is running low, our operational system will get an alert. We will contact you to inform you it requires replacing.

Your base alarm will come with a back-up battery which means if the plug supporting your alarm is switched off for any reason, you alarm will continue to work on the back-up battery. An alert will also be sent to our operational system so we can contact you to let you know your alarm is running on the back-up.

The battery should last around 9-12 months. Two ‘Duracell CR2016 Lithium Coin Cell +50% Extra Life’ batteries should be used to ensure maximum battery life.

  1. To access the batteries, a T6 screwdriver should be used to unscrew all four screws on the rear of the casing
  2. When the rear casing has been removed, gently prise up the circuit board at each corner using the screwdriver, being careful not to damage the electronics
  3. The batteries can be eased out and removed using your fingernail or a suitable instrument
  4. You will notice a plastic insulating strip separating the batteries from the circuit board components, please ensure the strip is kept in position
  5. When the batteries have been removed, press, and hold the button for around 10 seconds to discharge any residual power before inserting the new batteries
  6. While ensuring the plastic insulating strip is kept in position, insert the two new batteries, one on top of the other with both ‘+’ sides facing away from the circuit board
  7. Once the new batteries have been fitted, the LEDs will flash and the CairFall will enter transport mode
  8. Fit the circuit board back into the casing, ensuring it’s positioned the correct way round, then replace the rear cover and turn the screws until they’re firm, but not too tight
  9. Once finished, ensure the programmed settings are still correct and test the CairFall as normal

If you as the alarm user, or the person you are ordering for, have a long-term illness or disability, you do not have to pay VAT for this personal alarm service.

If you tick the box to confirm you are VAT exempt, no VAT will be added to your final purchase amount. You will need to complete a VAT relief form which will be sent to you after you place your order. Failure to return this form will result in a VAT charge being added onto your payment plan. If you do not quality for VAT exemption, please leave the box unticked at checkout. You can find out more about VAT exemption on the HMRC website.

  • Are you purchasing a personal alarm for personal or domestic use? (must be yes to apply plus one of the following)
  • Do you have a physical or mental impairment that has long-term and adverse effects on your ability to carry out everyday activities?
  • Are you being treated for a chronic, long-term health condition by a medical professional?

Your smoke detector can be secured to the wall or ceiling using the enclosed fixings in the box. Once the pattress is mounted, the wire from the smoke alarm should be checked that it is plugged into the the rest of the unit. There are clear instructions that come with every smoke detector.

Can’t find the answer to your question? Feel free to contact us and we’ll try to answer as quickly as possible.

01425 205547